The Ultramatic Eco dispenser is a high qaulity,affordable,basic aerosol dispensing unit. The
Ultramatic Eco dispenser provides a space gret treatment option availiable on the market.

Features:
High quality & durable with chemical resistant plastic - suitable for both insecticides & fresheners
Ease of use - Set and forget
3 Spray settings (7.5, 15 or 30min)
Manual 'on/off switch
Test Switch - For testing batteries, test spray or manual spray for immediate use
Operates on 2x 'D' alkaline batteries

Instructions:
Mounting the dispenser:
(For best result, mount the dispenser 2,5 to 3 meters above floor level)
Place the Dispenser in the location to be mounted, make a mark on the wall surface through the 2
mounting holes (M1)
Drill the holes at the marks and insert the anchors
Place the unit on the wall & affix the screws
Ensure the dispenser is mounted securely on the wall

Operating the dispenser:
Insert 2 "D" Alkaline batteries in the battery compartment.
Select the Spray interval switch to the preferred setting (7.5, 15 or 30 minutes).
Before inserting the can, push the hammer to the "up" position.
Insert the aerosol refill can in between the metal bracket in the dispenser. Make sure the actuator
points towards the front of the dispenser.
Using the on/off switch, turn the unit on. The green LED will light up for 2 seconds.
Test spray by pressing the test switch. Always ensure that the dispenser is turned away from your
face when testing the spray.
When the refill is low, the Green LED will start blinking
Switch the dispenser off and insert a new refill can.
Turn the unit on after 60 seconds. This will reset the spray counter.

Factory Setting is a 15-minute spray interval with 24 hours operation
2 Year Limited Warranty
Batteries not included

Areas of use:
Home
Food handling premises
Factories
Hotels
Offices
Shops
Toilets
Washrooms

Precautions:
Do not use in the presence of persons with known sensitivity to pyrethroids
In the case of signs of sensitivity, obtain medical advice
Avoid excessive inhalation and food contamination
Avoid spraying over plastic and highly polished surfaces, e.g. home appliances